Coolifting returns to Cosmoprof Worldwide Bologna

Coolifting resumes its presence in international actions with its participation in Cosmoprof Worldwide Bologna, after two years of suspension of the fair due to the global situation.

The Barcelona brand will attend again as an exhibitor, in the same way that it did until its last celebration in 2019. This new edition in 2022 has moved dates and will take place between April 29 and 2 May at the Bologna Fair, Italy.

Despite these last two difficult years that we have all experienced, Coolifting has not stopped working on its revolutionary concept in order to improve it and develop new products such as CoolShine, the luminosity and nutrition effect vial to apply with the Coolifting system. This continuous development is what has led the brand to become an innovative benchmark and it will show all of this in a design stand focused on the professional public. In addition, demonstration treatments will be carried out so that the attendees themselves can see for themselves the spectacular results and advances of this technology at stand C34 in Hall 29.

Coolifting will be represented by the management team, with the CEO Mr. Philippe Plan at the head, as well as several of the more than 50 international distributors that the brand has on the 5 continents.

This new presence at Cosmoprof, perhaps the most special of all, will serve to show the good health enjoyed by the brand and will allow the distribution network to be expanded throughout the world, maintaining strategic alliances and consolidating our current collaborations.

Cara Delevingne trusts Coolifting

Top model Cara Delevingne has been the latest celebrity to join Coolifting, as she shared on her official Instagram profile.

The British supermodel shared a video of the moments leading up to the shoot, where she was relaxed, content and happy to be about to receive the Coolifting treatment. Cara Delevingne, one of the best-known faces on the world runway, wanted to make her more than 43 million followers participate in this moment, which took place at Face Gym London.

In this way, the actress and singer also joins the current of celebrities who join the Coolifting concept after other references such as Kim Kardashian or Paris Hilton All of them, knowledgeable about the aesthetic world and aware of the importance of their image, have not doubted in betting on a revolutionary, effective and fast treatment that is available to everyone.

Coolifting Base – Connection pins replacement

Parts needed:

-> Base charging pins

If you need to replace the connection pins from the base, follow this guide:

  1. Remove the 2 screws form the base.
  2. Identify the pin connector and its metallic sheet. Remove the 2 screws from the metallic sheet.
  3. Connection pins are glued with hot glue. Proceed to carefully heat with hot air and remove the connection pins and its connector from the LED’s elctronic board. Please beware of the pins polarity.
  4. Insert the new pins following instructions in reverse order.
  5. Reassemble the base.

Clearing and cleaning product vial outflow

Components needed:
-> 5 x caps
-> 1 x tip

Tools needed:
-> 1x nichrome wire or equivalent

Part 1 – Gun opening

  1. Identify the 5 caps covering the screws and remove them
  2. Remove the blue tip with a screwdriver
  3. Remove the sticker covering the buttons with help of a sharp tool
  4. Remove the 5 screws
  5. Carefully separate the two housing parts while pressing the button indicated on the image
  6. Gun is now opened

Part 2 – Clearing

  1. Remove the 2 silicon tubes from the vial container and from the injector tip.
  2. With a nichrome wire, try to clear any residue that may be clogging the two silicone tubes.
  3. Realize the same procedure for the outflow holes in both the vial container and the injector tip.
  4. Replace back the 2 silicon tubes.
  5. Reassemble the gun by following Gun Opening instructions in reverse order.

Coolifting language change

  1. Take the gun out from the base while pressing the right hand button. The Language selector and Settings screen should show up on the display.
  2. Confirm the selection by pressing the trigger.
  3. Screen now shows the Language Selection. Change the language selected with the right button and accept by pressing the trigger.
  4. The software will reload automatically in the language selected.

Ceramic Tip replacement

Components needed:
-> 5 x plastic caps replacement
-> 1 x plastic blue tip replacement
-> 1 x ceramic tip (including temperature probe)

Part 1- Gun opening

  1. Identify the 5 caps covering the screws and remove them
  2. Remove the blue tip with a screwdriver
  3. Remove the sticker covering the buttons with help of a sharp tool
  4. Remove the 5 screws
  5. Carefully separate the two housing parts while pressing the button indicated on the image
  6. Gun is now opened

Part 2 – Remove Screen and logic board

  1. In the following steps, you will disconnect the cables and connectors attaching the logic board. The cables are for the following components:
    • Temperature probe
    • Product presence sensor
    • Trigger connector
    • LED’s connector
    • Injector connector
    • Power supply connector Please beware of the conector polarity!
    • Base connector pins
    • Resistance tip connector
  2. Remove the logic board and screen to facilitate manipulation in the next steps.

Part 3 – Remove injector

  1. Remove the 2 screws in order to remove the injector
  2. Gently remove the 2 silicone tubes from the vial dispenser
  3. Extract the old ceramic tip from the injector and disconnect resistance tip wires.
  4. The new ceramic tip comes with temperature probe wires. However, you should reconnect the resistance tip wires by following this video.
  5. Gently clean the injector tip to remove any trace of dirt
  6. Add silicone to the injector tip as showed in the image.
  7. Insert the new ceramic tip. Be Careful: do not extract the ceramic tip if the silicone has not solidified. This could clog the outflow hole, thus becoming the injector unusable.
  8. Once the silicone has dried out, replace the injector, reconnect the silicon tubes and replace the 2 injector screws.
  9. Reconnect the Temperature probe wires to the PCB.
  10. Reconnect the Resistance tip connector to the PCB.

Part 4 – Calibration

As the resistance from the ceramic tip is now new, you will need to perform a calibration:

Equipment needed:
· Multimeter
· Room Thermometer

  1. Place the gun in its base until it is fully charged.
  2. Take the gun out from the base while pressing the right hand button (see picture on the left). The Language selector and Settings screen should show up on the display.
  3. Change the selection to “Settings” by pressing the right hand button.
  4. Confirm the selection by pressing the trigger.
  5. Screen now shows the default battery voltage preconfigured.
  6. Use the multimeter to measure the current battery voltage. Use the two buttons to adjust the voltage on the screen until it matches with the value measured on the voltimeter. Confirm by pressing the trigger.
  7. Next screen shows the default preconfigured room temperature. Use the two buttons to adjust the temperature until it matches with the value measured on the room thermometer. Confirm by pressing the trigger.
  8. Press the trigger on the screens that follow until you reach the home screen. At this time all the changes will be saved.
  9. Reassemble the gun by following Gun Opening instructions in reverse order.

Screen and logic board replacement

Components needed:
-> 5 x plastic caps replacement
-> 1 x plastic blue tip replacement
-> 1 x electronic board

Part 1 – Gun Opening

  1. Identify the 5 caps covering the screws and remove them
  2. Remove the blue tip with a screwdriver
  3. Remove the sticker covering the buttons with help of a sharp tool
  4. Remove the 5 screws
  5. Carefully separate the two housing parts while pressing the button indicated on the image
  6. Gun is now opened

Part 2 – Screen and electronic board replacement

  1. In the following steps, you will disconnect the cables and connectors attaching the logic board. The cables are for the following components:
    • Temperature probe
    • Product presence sensor
    • Trigger connector
    • LED’s connector
    • Injector connector
    • Power supply connector Please beware of the conector polarity!
    • Base connector pins
    • Resistance tip connector
  2. Remove the logic board and screen to facilitate manipulation in the next steps.

Part 3 – Calibration

Equipment needed:
· Multimeter
· Room Thermometer

  1. Place the gun in its base until it is fully charged.
  2. Take the gun out from the base while pressing the right hand button (see picture on the left). The Language selector and Settings screen should show up on the display.
  3. Change the selection to “Settings” by pressing the right hand button.
  4. Confirm the selection by pressing the trigger.
  5. Screen now shows the default battery voltage preconfigured.
  6. Use the multimeter to measure the current battery voltage. Use the two buttons to adjust the voltage on the screen until it matches with the value measured on the voltimeter. Confirm by pressing the trigger.
  7. Next screen shows the default preconfigured room temperature. Use the two buttons to adjust the temperature until it matches with the value measured on the room thermometer. Confirm by pressing the trigger.
  8. Press the trigger on the screens that follow until you reach the home screen. At this time all the changes will be saved.
  9. Reassemble the gun by following Gun Opening instructions in reverse order.

Coolifting gun battery replacement

Components needed:
-> 5 x plastic caps replacement
-> 1 x plastic blue tip replacement
-> 1 x battery

Part1 – Gun opening

  1. Identify the 5 caps covering the screws and remove them
  2. Remove the blue tip with a screwdriver
  3. Remove the sticker covering the buttons with help of a sharp tool
  4. Remove the 5 screws
  5. Carefully separate the two housing parts while pressing the button indicated on the image
  6. Gun is now opened

Part 2 – Battery replacement

  1. Remove the 2 screws in order to remove the injector and have easy acces to the power supply wire.
  2. Disconect the power supply wire. Please beware of the conector polarity
  3. The battery might be attached with hot glue; in order to detach the battery, proceed to heat the glue with hot air.
  4. Remove the battery and replace it with a new one.
  5. Insert the injector back with its screws.
  6. Reconect the power supply wire. Please beware of the conector polarity

Part 3 – Calibration

Equipment needed:
· Multimeter
· Room Thermometer

  1. Place the gun in its base until it is fully charged.
  2. Take the gun out from the base while pressing the right hand button (see picture on the left). The Language selector and Settings screen should show up on the display.
  3. Change the selection to “Settings” by pressing the right hand button.
  4. Confirm the selection by pressing the trigger.
  5. Screen now shows the default battery voltage preconfigured.
  6. Use the multimeter to measure the current battery voltage. Use the two buttons to adjust the voltage on the screen until it matches with the value measured on the voltimeter. Confirm by pressing the trigger.
  7. Next screen shows the default preconfigured room temperature. Use the two buttons to adjust the temperature until it matches with the value measured on the room thermometer. Confirm by pressing the trigger.
  8. Press the trigger on the screens that follow until you reach the home screen. At this time all the changes will be saved.
  9. Reassemble the gun by following Gun Opening instructions in reverse order.

Coolifting 2

From Coolifting, we continue to develop our technology to improve and achieve new goals. We have implemented a series of improvements to create a new device. The biggest change so far. The latest evolution. A new generation: Coolifting 2.

The improvements cover different areas to generate a global experience, both for the user and for professionals:

  • Total stability: a continuous, homogeneous and stable flow that provides greater use of the active product. The homogeneity in the flow benefits the penetration of the serum since the paradoxical vasomotricity is more continuous.
  • Greater intensity: the session becomes more intense compressing the treatment into 3 minutes of full application. After that, it is recommended to leave the patient to rest for between one and two minutes before doing the massage.
  • Increased autonomy: the duration of each total battery charge has increased by 38% to increase the number of treatments that can be carried out with a single total charge.
  • Optimized interface: new user experience when using the device, with a more modern, intuitive and manageable design which enables the configuration of the type of session to be performed (Coolifting, CoolClear and CoolCell) or to change the language.

Discover the new Coolifting 2, the biggest change so far

VOGUE

Full page in the Vogue’s 2019 first publication.