Coolifting Base – Connection pins replacement

Parts needed:

-> Base charging pins

If you need to replace the connection pins from the base, follow this guide:

  1. Remove the 2 screws form the base.
  2. Identify the pin connector and its metallic sheet. Remove the 2 screws from the metallic sheet.
  3. Connection pins are glued with hot glue. Proceed to carefully heat with hot air and remove the connection pins and its connector from the LED’s elctronic board. Please beware of the pins polarity.
  4. Insert the new pins following instructions in reverse order.
  5. Reassemble the base.